Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: AUTO-MANUAL
Set the tyre pressure to placard pressure
Read all sensor IDs
Park the car for 15 min
Put the vehicle into relearn mode through the appropriate dashboard controls
Drive until the new sensor ID's are learned by the ECU.
Relearn Type: OBDII
Set the tyre pressure
Read Left front sensor ID's
Repeat procedure for RF/RR/LR tyres
Turn ignition on by pushing ON/START twice
Connect the OBDII Cable/Module to OBD connector
Follow the screens instructions to reset the ECU
Read all sensor IDs again
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
| Make | BAIC |
|---|---|
| Model | BJ60 |
| Model Code | |
| Date of Manufacture | 2024 |
| OE Sensor Manufacturer | BAOLONG |
| OE Sensor Number | A00093125 |
| OE Sensor Description |
Choose a sensor type:
Click an image to show the correct service parts for that type:
Service Parts For: Baolong Clamp-In Sensor- Buick
Show Products With Tags:
AM Parts
TYR-V065_10
Box Of 10 High Speed Dual Fitment Snap-In Valves for T-Pro Hybrid 3.5 and Schrader Sensors
Most Popular ValveSchraderT-ProHybrid 3.5OE-RParallel-RightAngleAM PartBarcode: 6924478985277
Comparative Parts:
A box of 10 snap-in valves, with each including 1 valve stem, 1 screw and 1 valve cap.
These valves are self threading and suitable for use with T-Pro Hybrid 3.5, OE-R HTS-3200, Schrader Gen 4 and Schrader Faraday Sensors.
TYR-V003_10
Box Of 10 Replacement Clamp-In Valves for Schrader Rev 4
ValveSchraderParallelAM PartBarcode: 6924478980715
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Rev 4 type sensors.
TYR-V004_10
Box Of 10 Replacement Snap-In Valves for Schrader Rev 4
ValveSchraderParallelAM PartBarcode: 6924478962070
Comparative Parts:
A box of 10 snap-in valves.
These valves are suitable for use with Schrader Rev 4 type sensors.
TYR-V034_10
Box Of 10 Replacement Clamp-In Valves for Schrader REV 4 Sensor
ValveSchraderParallelAM PartBarcode: 6924478980951
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Rev 4 type sensors.
TYR-V012_10
Box Of 10 Replacement Snap-In Valves for T-Pro Hybrid 3.5 Schrader Gen 4
ValveSchraderT-ProHybrid 3.5OE-RParallelAM PartBarcode: 6924478962070
Comparative Parts:
A box of 10 snap-in valves.
These valves are self-threading and suitable for use with T-Pro Hybrid 3.5, OE-R HTS-3200 and Schrader gen 4 type sensors. A box of 10 snap-in valves, each include: 1 valve stem, 1 screw and 1 valve cap.
OE Parts
SCH-V003
Clamp-In Valve for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563001563
Comparative Parts:
A complete single Schrader clamp-in valve, which includes: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
This valve is suitable for use with Schrader Gen 4 type sensors.
SCH-V003_10
Box Of 10 Clamp-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563002744
Comparative Parts:
A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap, 1 Screw and 1 Valve Core.
These valves are suitable for use with Schrader Gen 4 type sensors.
SCH-V004_10
Box Of 10 Snap-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563003710
Comparative Parts:
A box of 10 Schrader snap-in valves.
These valves are suitable for use with Schrader Gen 4 type sensors. A box of 10 snap-in valves, each include: 1 Valve Stem, 1 Screw and 1 Valve Cap.
SCH-V012_10
Box Of 10 Snap-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563000900
Comparative Parts:
A box of 10 Schrader snap-in valves.
These valves are self-threading and suitable for use with Schrader gen 4 type sensors.
SCH-V025_10
Box Of 10 Snap-In Valves for Schrader Rev 5
ValveSchraderParallelOE PartBarcode: 5055563003727
Comparative Parts:
A box of 10 Schrader snap-in valves.
These valves are suitable for use with Schrader Rev 5 type sensors.
SCH-V048_10
Box Of 10 Replacement High Speed Snap-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode:
Comparative Parts:
A box of 10 Schrader high speed snap-in valves.
These valves are suitable for use with Schrader Gen 4 type sensors. A box of 10 snap-in valves, each include: 1 High Speed Valve Stem, 1 Screw and 1 Valve Cap.