Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: AUTO-SELF
Set the tyre pressure to the placard pressure
Read all sensor IDs
Park the car for 15 minutes
Drive until the new sensor ID's are learned by the ECU
Relearn Type: OBDII
Set tyre pressure
Read all sensor IDs
Turn ignition to ON (engine off) or by pushing rapidly twice on ON/START (With remote keyless entry)
Connect the OBDII Cable/Module to OBD connector
Follow the screen's instructions to reset the ECU
Turn ignition to OFF then ON (engine off)
Wait for 5 minutes
NOTICE: If the TPMS warning light remains ON, drive for 20 min
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
| Make | Hyundai |
|---|---|
| Model | Genesis |
| Model Code | BH |
| Date of Manufacture | 2008 |
| OE Sensor Manufacturer | TRW |
| OE Sensor Number | 529333M000 |
| OE Sensor Description |
Choose a sensor type:
SCH-S535
Schrader Pre-Programmed EZ Delta Clamp-In Sensor
OE_SENSSensorSchraderOriginal EquipmentBarcode:
Comparative Parts: SCH-S535, 72-22-047, 73-22-047, HSCH-S535, T2200-GO,
TRW-S060
TRW Version 1 Fixed Valve Clamp-In Sensor
OE_SENSSensorTRWOriginal EquipmentBarcode: 5055563003512
Comparative Parts: TRW-S060, 72-20-067, 73-20-067, HTRW-S060, 4052, 529333M000, 5055563003512,
TRW Version 1 OE replacement sensor.
Other Programmable Sensors
HUF-S408
Intellisens Clamp-In Sensor
SensorHufBarcode: 5055563028720
Comparative Parts: HUF-S408, 72-21-935, 73-21-935, HHUF-S408, 5055563028720,
HUF configurable Intellisens 4040 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
HUF-S559
Intellisens Clamp-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S559, 72-21-958, 73-21-958, HHUF-S559,
HUF-S409
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S409, 72-21-936, 73-21-936, HHUF-S409,
HUF configurable Intellisens 4041 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
HUF-S560
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S560, 72-21-959, 73-21-959, HHUF-S560,
SCH-S163
Schrader EZ 2.0 Snap-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005516
Comparative Parts: SCH-S163, 72-20-844, 73-20-844, HSCH-S163, 1210, 5055563005516,
SCH-S164
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005523
Comparative Parts: SCH-S164, 72-20-845, 73-20-845, HSCH-S164, 2200, 5055563005523,
Schrader programmable EZ-Sensor 2.0 433Mhz EU.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S165
Schrader Faraday EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005530
Comparative Parts: SCH-S165, 72-20-846, 73-20-846, HSCH-S165, 2210, 5055563005530,
Click an image to show the correct service parts for that type:
Service Parts For: Schrader Pre-Programmed EZ Delta Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-V022_10
Box Of 10 Replacement Clamp-In Valves for Schrader Gen Gamma
Most Popular ValveSchraderAM PartBarcode: 6924478962353
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Gen Gamma and Schrader Gen Delta type sensors.
OE Parts
Service Parts For: TRW Version 1 Fixed Valve Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-K003_10
Box Of 10 Service Kits for Schrader Gen 2/3
Most Popular Service KitSchraderAM PartBarcode: 6924478964135
Comparative Parts:
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These service kits are suitable for use with Schrader Gen 2/3 type sensors.
TYR-K004_10
Box Of 10 Service Kits for Schrader Gen 2/3
Service KitSchraderAM PartBarcode: 6924478961189
Comparative Parts:
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These service kits are suitable for use with Schrader Gen 2/3 type sensors.
OE Parts
SCH-K003_10
Box Of 10 Service Kits for Schrader Gen 2/3
Service KitSchraderOE PartBarcode: 5055563000634
Comparative Parts:
A box of 10 Schrader service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These service kits are suitable for use with Schrader Gen 2/3 type sensors.