Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: AUTO-SELF
Set the tyre pressure to the placard pressure
Read all sensor IDs
Park the car for 15 minutes
Drive until the new sensor ID's are learned by the ECU
Relearn Type: OBDII
Set tyre pressure
Read all sensor IDs
Turn ignition to ON (engine off) or by pushing rapidly twice on ON/START (With remote keyless entry)
Connect the OBDII Cable/Module to OBD connector
Follow the screen's instructions to reset the ECU
Turn ignition to OFF then ON (engine off)
Wait for 5 minutes
NOTICE: If the TPMS warning light remains ON, drive for 20 min
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
| Make | Hyundai |
|---|---|
| Model | Santa Fe |
| Model Code | CM |
| Date of Manufacture | 2005 |
| OE Sensor Manufacturer | LEAR |
| OE Sensor Number | 529332B000 |
| OE Sensor Description |
Choose a sensor type:
LEA-S072
Lear Snap-In Sensor
OE_SENSSensorLearOriginal EquipmentBarcode: 5055563003680
Comparative Parts: LEA-S072, 72-20-083, 73-20-083, HLEA-S072, 4057, 5055563003680,
Lear OE replacement sensor.
SCH-S535
Schrader Pre-Programmed EZ Delta Clamp-In Sensor
OE_SENSSensorSchraderOriginal EquipmentBarcode:
Comparative Parts: SCH-S535, 72-22-047, 73-22-047, HSCH-S535, T2200-GO,
Other Programmable Sensors
HUF-S408
Intellisens Clamp-In Sensor
SensorHufBarcode: 5055563028720
Comparative Parts: HUF-S408, 72-21-935, 73-21-935, HHUF-S408, 5055563028720,
HUF configurable Intellisens 4040 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
HUF-S559
Intellisens Clamp-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S559, 72-21-958, 73-21-958, HHUF-S559,
HUF-S409
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S409, 72-21-936, 73-21-936, HHUF-S409,
HUF configurable Intellisens 4041 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
HUF-S560
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S560, 72-21-959, 73-21-959, HHUF-S560,
SCH-S163
Schrader EZ 2.0 Snap-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005516
Comparative Parts: SCH-S163, 72-20-844, 73-20-844, HSCH-S163, 1210, 5055563005516,
SCH-S164
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005523
Comparative Parts: SCH-S164, 72-20-845, 73-20-845, HSCH-S164, 2200, 5055563005523,
Schrader programmable EZ-Sensor 2.0 433Mhz EU.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S165
Schrader Faraday EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005530
Comparative Parts: SCH-S165, 72-20-846, 73-20-846, HSCH-S165, 2210, 5055563005530,
Click an image to show the correct service parts for that type:
Service Parts For: Lear Snap-In Sensor
Show Products With Tags:
AM Parts
TYR-V017_10
Box Of 10 Replacement Snap-In Valves for Original T-Pro Sensors
Most Popular ValveT-ProAM PartBarcode: 6924478968096
Comparative Parts:
A box of 10 snap-in valves.
These valves are suitable for use with snap-in first generation T-Pro sensors.
NOT COMPATIBLE WITH TYR-S500 - TYR-S509 (T-Pro Hybrid 3.5/HTS-3200 OE-R) SERIES SENSORS
OE Parts
Service Parts For: Schrader Pre-Programmed EZ Delta Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-V022_10
Box Of 10 Replacement Clamp-In Valves for Schrader Gen Gamma
Most Popular ValveSchraderAM PartBarcode: 6924478962353
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Gen Gamma and Schrader Gen Delta type sensors.
