Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: AUTO-SELF
Set the tyre pressure to the placard pressure
Read all sensor IDs
Park the car for 15 minutes
Drive until the new sensor ID's are learned by the ECU
Relearn Type: OBDII
Set tyre pressure
Read all sensor IDs
Turn ignition to ON (engine off) or by pushing rapidly twice on ON/START (With remote keyless entry)
Connect the OBDII Cable/Module to OBD connector
Follow the screen's instructions to reset the ECU
Turn ignition to OFF then ON (engine off)
Wait for 5 minutes
NOTICE: If the TPMS warning light remains ON, drive for 20 min
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
| Make | Lancia |
|---|---|
| Model | Flavia |
| Model Code | JS |
| Date of Manufacture | 2012 |
| OE Sensor Manufacturer | SCHRADER |
| OE Sensor Number | 68078768AA |
| OE Sensor Description |
Choose a sensor type:
CON-S019.C
VDO TG1C Clamp-In Sensor
OE_SENSSensorVDOOriginal EquipmentBarcode: 5055563004120
Comparative Parts: CON-S019.C, 72-20-015.C, 73-20-015.C, HCON-S019.C, 65722-67.C, 5055563004120,
VDO TG1C OE replacement sensor.
SCH-S019
Schrader Gen 4 Snap-In Sensor
OE_SENSSensorSchraderOriginal EquipmentBarcode: 5055563000146
Comparative Parts: SCH-S019, 72-20-015, 5623995, 3005, 65722-67, 28434, 1043,9481,9028, 5055563000146, TECHSCH-S019,
Schrader Gen 4 OE Replacement sensor.
SCH-S535
Schrader Pre-Programmed EZ Delta Clamp-In Sensor
OE_SENSSensorSchraderOriginal EquipmentBarcode:
Comparative Parts: SCH-S535, 72-22-047, 73-22-047, HSCH-S535, T2200-GO,
Other Programmable Sensors
ALI-S113
Alligator Sens.It Clamp-In Sensor 433MHz
SensorAlligatorBarcode: 5055563003345
Comparative Parts: ALI-S113, 72-20-085, 73-20-085, HALI-S113, 590914, 5055563003345, 5624000,
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
ALI-S114
Alligator Sens.It Snap-In Sensor 433MHz
SensorAlligatorBarcode: 5055563003352
Comparative Parts: ALI-S114, 72-20-086, 73-20-086, HALI-S114, 590918, 5055563003352, 5624002,
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
HUF-S559
Intellisens Clamp-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S559, 72-21-958, 73-21-958, HHUF-S559,
HUF-S560
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S560, 72-21-959, 73-21-959, HHUF-S560,
SCH-S163
Schrader EZ 2.0 Snap-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005516
Comparative Parts: SCH-S163, 72-20-844, 73-20-844, HSCH-S163, 1210, 5055563005516,
SCH-S164
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005523
Comparative Parts: SCH-S164, 72-20-845, 73-20-845, HSCH-S164, 2200, 5055563005523,
Schrader programmable EZ-Sensor 2.0 433Mhz EU.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S165
Schrader Faraday EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005530
Comparative Parts: SCH-S165, 72-20-846, 73-20-846, HSCH-S165, 2210, 5055563005530,
Click an image to show the correct service parts for that type:
Service Parts For: VDO TG1C Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-V006_10
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
Most Popular ValveVDOAM PartBarcode: 6924478980739
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap.
These valves are suitable for use with VDO TG1C type sensors.
TYR-K008_10
Box Of 10 Service Kits for VDO TG1C
Service KitVDOAM PartBarcode: 6924478980609
Comparative Parts:
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core.
This service kit is suitable for use with VDO TG1C type sensors.
TYR-V053_10
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
ValveVDOAM PartBarcode: 6924478981071
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with VDO TG1C type sensors.
OE Parts
SCH-V006_10
Box Of 10 Clamp-In Valves for VDO TG1C
ValveVDOOE PartBarcode: 5055563001525
Comparative Parts:
A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap .
These valves are suitable for use with VDO TG1C type sensors.
CON-K008
Service Kit for VDO TG1C
Service KitVDOOE PartBarcode: 5055563000726
Comparative Parts:
A single VDO service kit, which includes: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core.
This service kit is suitable for use with VDO TG1C type sensors.
Service Parts For: Schrader Gen 4 Snap-In Sensor
Show Products With Tags:
AM Parts
TYR-V065_10
Box Of 10 High Speed Dual Fitment Snap-In Valves for T-Pro Hybrid 3.5 and Schrader Sensors
Most Popular ValveSchraderT-ProHybrid 3.5OE-RParallel-RightAngleAM PartBarcode: 6924478985277
Comparative Parts:
A box of 10 snap-in valves, with each including 1 valve stem, 1 screw and 1 valve cap.
These valves are self threading and suitable for use with T-Pro Hybrid 3.5, OE-R HTS-3200, Schrader Gen 4 and Schrader Faraday Sensors.
TYR-V003_10
Box Of 10 Replacement Clamp-In Valves for Schrader Rev 4
ValveSchraderParallelAM PartBarcode: 6924478980715
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Rev 4 type sensors.
TYR-V004_10
Box Of 10 Replacement Snap-In Valves for Schrader Rev 4
ValveSchraderParallelAM PartBarcode: 6924478962070
Comparative Parts:
A box of 10 snap-in valves.
These valves are suitable for use with Schrader Rev 4 type sensors.
TYR-V034_10
Box Of 10 Replacement Clamp-In Valves for Schrader REV 4 Sensor
ValveSchraderParallelAM PartBarcode: 6924478980951
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Rev 4 type sensors.
TYR-V012_10
Box Of 10 Replacement Snap-In Valves for T-Pro Hybrid 3.5 Schrader Gen 4
ValveSchraderT-ProHybrid 3.5OE-RParallelAM PartBarcode: 6924478962070
Comparative Parts:
A box of 10 snap-in valves.
These valves are self-threading and suitable for use with T-Pro Hybrid 3.5, OE-R HTS-3200 and Schrader gen 4 type sensors. A box of 10 snap-in valves, each include: 1 valve stem, 1 screw and 1 valve cap.
OE Parts
SCH-V003
Clamp-In Valve for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563001563
Comparative Parts:
A complete single Schrader clamp-in valve, which includes: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
This valve is suitable for use with Schrader Gen 4 type sensors.
SCH-V003_10
Box Of 10 Clamp-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563002744
Comparative Parts:
A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Valve Cap, 1 Screw and 1 Valve Core.
These valves are suitable for use with Schrader Gen 4 type sensors.
SCH-V004_10
Box Of 10 Snap-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563003710
Comparative Parts:
A box of 10 Schrader snap-in valves.
These valves are suitable for use with Schrader Gen 4 type sensors. A box of 10 snap-in valves, each include: 1 Valve Stem, 1 Screw and 1 Valve Cap.
SCH-V012_10
Box Of 10 Snap-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode: 5055563000900
Comparative Parts:
A box of 10 Schrader snap-in valves.
These valves are self-threading and suitable for use with Schrader gen 4 type sensors.
SCH-V025_10
Box Of 10 Snap-In Valves for Schrader Rev 5
ValveSchraderParallelOE PartBarcode: 5055563003727
Comparative Parts:
A box of 10 Schrader snap-in valves.
These valves are suitable for use with Schrader Rev 5 type sensors.
SCH-V048_10
Box Of 10 Replacement High Speed Snap-In Valves for Schrader Gen 4
ValveSchraderParallelOE PartBarcode:
Comparative Parts:
A box of 10 Schrader high speed snap-in valves.
These valves are suitable for use with Schrader Gen 4 type sensors. A box of 10 snap-in valves, each include: 1 High Speed Valve Stem, 1 Screw and 1 Valve Cap.
Service Parts For: Schrader Pre-Programmed EZ Delta Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-V022_10
Box Of 10 Replacement Clamp-In Valves for Schrader Gen Gamma
Most Popular ValveSchraderAM PartBarcode: 6924478962353
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Gen Gamma and Schrader Gen Delta type sensors.
