Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: AUTO-MANUAL
Set the tyre pressure to placard pressure
Read all sensor IDs
Park the car for 15 min
Put the vehicle into relearn mode through the appropriate dashboard controls
Drive until the new sensor ID's are learned by the ECU.
Relearn Type: OBDII
Set tyre pressure
Read all sensor IDs
Turn ignition to ON (engine off) or by pushing rapidly twice on ON/START (With remote keyless entry)
Connect the OBDII Cable/Module to OBD connector
Follow the screen's instructions to reset the ECU
Turn ignition to OFF then ON (engine off)
Wait for 5 minutes
NOTICE: If the TPMS warning light remains ON, drive for 20 min
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
| Make | Qoros |
|---|---|
| Model | 3/Cross |
| Model Code | CF11;CF14;CF14K |
| Date of Manufacture | 2014 |
| OE Sensor Manufacturer | CONTINENTAL |
| OE Sensor Number | 42753TL0G540 |
| OE Sensor Description |
Choose a sensor type:
CON-S087
VDO TG1C Clamp-In Sensor - Honda
OE_SENSSensorVDOContinentalOriginal EquipmentBarcode: 5055563004076
Comparative Parts: CON-S087, 72-20-804, 4072, S180052059, 5055563004076, TECHCON-S087,
VDO TG1C OE replacement sensor.
SCH-S535
Schrader Pre-Programmed EZ Delta Clamp-In Sensor
OE_SENSSensorSchraderOriginal EquipmentBarcode:
Comparative Parts: SCH-S535, 72-22-047, 73-22-047, HSCH-S535, T2200-GO,
Other Programmable Sensors
HUF-S559
Intellisens Clamp-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S559, 72-21-958, 73-21-958, HHUF-S559,
HUF-S560
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S560, 72-21-959, 73-21-959, HHUF-S560,
SCH-S163
Schrader EZ 2.0 Snap-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005516
Comparative Parts: SCH-S163, 72-20-844, 73-20-844, HSCH-S163, 1210, 5055563005516,
SCH-S164
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005523
Comparative Parts: SCH-S164, 72-20-845, 73-20-845, HSCH-S164, 2200, 5055563005523,
Schrader programmable EZ-Sensor 2.0 433Mhz EU.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S165
Schrader Faraday EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005530
Comparative Parts: SCH-S165, 72-20-846, 73-20-846, HSCH-S165, 2210, 5055563005530,
Click an image to show the correct service parts for that type:
Service Parts For: VDO TG1C Clamp-In Sensor - Honda
Show Products With Tags:
AM Parts
TYR-V006_10
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
Most Popular ValveVDOAM PartBarcode: 6924478980739
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap.
These valves are suitable for use with VDO TG1C type sensors.
TYR-K009_10
Box Of 10 Service Kits for VDO TG1C
Service KitVDOAM PartBarcode: 6924478961400
Comparative Parts:
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core.
This service kit is suitable for use with VDO TG1C type sensors.
TYR-V053_10
Box Of 10 Replacement Clamp-In Valves for VDO TG1C
ValveVDOAM PartBarcode: 6924478981071
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with VDO TG1C type sensors.
OE Parts
SCH-V006_10
Box Of 10 Clamp-In Valves for VDO TG1C
ValveVDOOE PartBarcode: 5055563001525
Comparative Parts:
A box of 10 Schrader clamp-in valves, with each including: 1 Valve Stem and 1 Valve Cap .
These valves are suitable for use with VDO TG1C type sensors.
CON-K009
Service Kit for VDO TG1C
Service KitVDOOE PartBarcode: 5055563000733
Comparative Parts:
A single VDO service kit, which includes: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core.
This service kit is suitable for use with VDO TG1C type sensors.
Service Parts For: Schrader Pre-Programmed EZ Delta Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-V022_10
Box Of 10 Replacement Clamp-In Valves for Schrader Gen Gamma
Most Popular ValveSchraderAM PartBarcode: 6924478962353
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Gen Gamma and Schrader Gen Delta type sensors.
