Vehicle Relearn
The following information must be followed carefully to allow the vehicle to correctly learn the new sensor IDs:
Relearn Type: OBDII
Set tyre pressure to 3.8 bar
Wait for 5 min
Read all sensor IDs
Turn ignition ON by pushing rapidly ON/START twice (NOTE: the engine MUST be on)
Connect the OBDII Cable/Module to OBD connector
Follow the screens instructions to reset the ECU
Turn ignition to OFF then ON (engine off)
Deflate all tyres to desired pressure according to the placard
Wait for 20 min
OBDII Port Location*
*The location shown is for left-hand drive vehicles.
| Make | Renault |
|---|---|
| Model | Scenic 2 |
| Model Code | J84;JM |
| Date of Manufacture | 2003 |
| OE Sensor Manufacturer | CONTINENTAL |
| OE Sensor Number | 407005578R |
| OE Sensor Description |
Choose a sensor type:
CON-S010
VDO TG1B Clamp-In Sensor
OE_SENSSensorVDOContinentalOriginal EquipmentBarcode: 5055563000078
Comparative Parts: CON-S010, 72-20-008, 4036, 65397-67, 5055563000078, TECHCON-S010,
VDO TG1B OE replacement sensor.
SCH-S535
Schrader Pre-Programmed EZ Delta Clamp-In Sensor
OE_SENSSensorSchraderOriginal EquipmentBarcode:
Comparative Parts: SCH-S535, 72-22-047, 73-22-047, HSCH-S535, T2200-GO,
Other Programmable Sensors
ALI-S113
Alligator Sens.It Clamp-In Sensor 433MHz
SensorAlligatorBarcode: 5055563003345
Comparative Parts: ALI-S113, 72-20-085, 73-20-085, HALI-S113, 590914, 5055563003345, 5624000,
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
ALI-S114
Alligator Sens.It Snap-In Sensor 433MHz
SensorAlligatorBarcode: 5055563003352
Comparative Parts: ALI-S114, 72-20-086, 73-20-086, HALI-S114, 590918, 5055563003352, 5624002,
Alligator programmable Sens.It sensor 433Mhz.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
HUF-S408
Intellisens Clamp-In Sensor
SensorHufBarcode: 5055563028720
Comparative Parts: HUF-S408, 72-21-935, 73-21-935, HHUF-S408, 5055563028720,
HUF configurable Intellisens 4040 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
HUF-S559
Intellisens Clamp-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S559, 72-21-958, 73-21-958, HHUF-S559,
HUF-S409
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S409, 72-21-936, 73-21-936, HHUF-S409,
HUF configurable Intellisens 4041 sensor.
Requires a TPMS diagnostic tool to configure the sensor for a particular vehicle.
HUF-S560
Intellisens Snap-In Sensor
SensorHufBarcode:
Comparative Parts: HUF-S560, 72-21-959, 73-21-959, HHUF-S560,
SCH-S163
Schrader EZ 2.0 Snap-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005516
Comparative Parts: SCH-S163, 72-20-844, 73-20-844, HSCH-S163, 1210, 5055563005516,
SCH-S164
Schrader Delta EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005523
Comparative Parts: SCH-S164, 72-20-845, 73-20-845, HSCH-S164, 2200, 5055563005523,
Schrader programmable EZ-Sensor 2.0 433Mhz EU.
Requires a TPMS diagnostic tool to program the sensor for a particular vehicle.
SCH-S165
Schrader Faraday EZ 2.0 Clamp-In Sensor - EU 433Mhz
SensorSchraderBarcode: 5055563005530
Comparative Parts: SCH-S165, 72-20-846, 73-20-846, HSCH-S165, 2210, 5055563005530,
Click an image to show the correct service parts for that type:
Service Parts For: VDO TG1B Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-V013_10
Box Of 10 Replacement Clamp-In Valves for VDO TG1B
Most Popular ValveVDOAM PartBarcode: 6924478980821
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with VDO TG1B type sensors.
TYR-K006_10
Box Of 10 Service Kits for VDO TG1B
Service KitVDOAM PartBarcode: 6924478961417
Comparative Parts:
A box of 10 service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer and 1 Valve Core.
These service kits are suitable for use with VDO TG1B type sensors.
TYR-K005_10
Box Of 10 Service Kits for VDO TG1B
Service KitVDOAM PartBarcode: 6924478961486
Comparative Parts:
A box of service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core and 4 Rings.
These service kits are suitable for use with VDO TG1B type sensors.
OE Parts
SCH-K005_10
Box Of 10 Service Kits for VDO TG1B
Service KitVDOOE PartBarcode: 5055563000658
Comparative Parts:
A box of VDO OE service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core and 4 Rings.
These service kits are suitable for use with VDO TG1B type sensors.
SCH-K006_10
Box Of 10 Service Kits for VDO TG1B
Service KitVDOOE PartBarcode: 5055563000665
Comparative Parts:
A box of 10 VDO service kits, with each including: 1 Nut, 1 Rubber Grommet, 1 Metal Washer, 1 Valve Cap and 1 Valve Core.
These service kits are suitable for use with VDO TG1B type sensors.
Service Parts For: Schrader Pre-Programmed EZ Delta Clamp-In Sensor
Show Products With Tags:
AM Parts
TYR-V022_10
Box Of 10 Replacement Clamp-In Valves for Schrader Gen Gamma
Most Popular ValveSchraderAM PartBarcode: 6924478962353
Comparative Parts:
A box of 10 clamp-in valves, with each including: 1 Valve Stem, 1 Nut, 1 Rubber Grommet, 1 Plastic Washer, 1 Valve Cap and 1 Valve Core.
These valves are suitable for use with Schrader Gen Gamma and Schrader Gen Delta type sensors.
